Black Cerakote Mosfet Gloom

LIMELIGHT MECHANICS MOSFET GLOOM.

Black military grade POM with black logo and black Cerakote button (PLEASE NOTE – This offering is for an all black version, not the SS version shown in the image).
Sold as a combo with matching black POM beauty ring and drip tip.

MOSFET SWITCH

The Stainless Steel switch plate gives a signal to the Mosfet installed inside the mod, which in turn conducts current to the 510 connector. Top of the range Mosfets used inside this device can handle over 200A of current without dissipating any heat. The tactile button used is rated at some 300g of activating force. This switch system has virtually zero voltage drop as a result of precise wiring and component positioning and it requires no maintenance.

REQUIRES A SINGLE 18650 BATTERY

CAUTION: Separate to the Mosfet Switch, this is fundamentally a mechanical mod and is only recommended for experienced users. A thorough understanding of OHMs law and battery capabilities is essential for the safe and proper use of this device. Lithium Ion batteries can be volatile and have the potential to be extremely dangerous if used incorrectly.
Five Ten Inc takes no responsibility for mishaps that may arise through the use of this product.

LIFETIME WARRANTY (Through the manufacturer. All returns are to be sent directly to Limelight Mechanics)
 
The Limelight branded products are warranted to the original owner against manufacturing defects in materials and workmanship for the lifetime of the product. If a Limelight branded product covered by this warranty fails due to a manufacturing defect we will repair the product, without charge, or replace it, at our discretion. Only original, unaltered and unmodified materials and workmanship are covered by this policy. This warranty does not cover damage caused by accident, improper care, negligence, normal wear and tear, or the natural breakdown of materials over extended time and use.
Damage not covered under warranty may be repaired for a reasonable rate and a fee will be charged for return shipping.
For warranty evaluation, your product must be returned directly to Limelight Mechanics Warranty Department, Limelight d.o.o, Ljube Uroševića 14/62, 35000 Jagodina, Serbia. All shipping to Warranty must be pre-paid and insured. Limelight Mechanics cannot be liable for lost in-bound packages.
This warranty is available worldwide.
This warranty gives you specific legal rights; you may have other rights, which vary from state to state.
Limelight Mechanics lifetime warranty covers manufacturing defects in materials and workmanship, regardless of the age of the product, but it does not cover normal wear and tear. Wear and tear is damage that naturally and inevitably occurs as a result of normal use. Regardless of how carefully you use, or how well you care for your Limelight Mechanics products, it will eventually begin to show age and wear. Common examples of wear and tear that would not be covered under the lifetime warranty include abrasions from rubbing when you use the products and general breakdown of the materials over the years.

REPAIR GUIDELINES
If you’re having problems with your product by Limelight Mechanics, please send it in along with our Warranty Return Form to us at the following address for inspection and repair:

Limelight d.o.o, Ljube Uroševića 14/62, 35000 Jagodina, Serbia

Please make sure that the shipping is prepaid, the package is insured for full replacement value and you use a shipping method that will provide you with a tracking number. Please mark the areas in question on the product with colored tape or masking tape, so we can find them easily, and make sure that your note describes their location.

If your warranted product by Limelight Mechanics fails due to a manufacturing defect in materials or workmanship, our first option will be to repair the item, free of charge. If the product is not repairable, or if the cost of repairing the item exceeds the cost of a new one, we will replace it. If your Limelight Mechanics product has special memories attached to it that make it irreplaceable to you, please indicate so on the Warranty Return Form and we will not replace it and it will be returned to you.
Our typical turnaround time is 2 weeks from the time we receive your product until it is returned to you. In some cases we can get it back to you sooner. In some cases, it may take longer. During peak season our turnaround time can be longer.

As stated in our warranty policy, the customer pays the shipping charges to send products to the Warranty Department. Limelight Mechanics will absorb the return shipping charges using regular mail. If you request that we return your product by UPS, DHL of Fedex, the additional shipping charges will be billed to you. Shipping charges for all non-warranty repairs are at the owner’s expense.

The cost of non-warranty repairs varies from one repair to another, depending on the cost of the materials and length of time it takes for us to do the repair. After your product is evaluated, we will send you a letter with the final repair costs, and request that you contact us us to approve the charges.

You can track your package with your shipper to determine if and when it has been delivered. Once we have received your product by Limelight Mechanics in the Warranty Department, we will send out an email that will let you know the status of your repair. Again, our typical turnaround time is 2 weeks from the day we receive your product at our